- Contact Person : Ms. Hu Angela
- Company Name : Shenzhen Photon Broadband Technology Co., Ltd.
- Tel : 0086-755-86143809
- Fax : 0086-755-86156819
- Address : Guangdong,Shenzhen,2/F Hivac BLD,2nd Langshan Rd ,North Hi-tech Industrial Park Shenzhen,China
- Country/Region : China
- Zip : 518057
Fiberway 2016 MDU ONU
Description
Fiberway2000 series is MDU which complies with IEEE802.3ah and PRC communication industry standard (YD/T 1475-2006). It integrates with the functions of the Ethernet switch and ONU, so when it works together with OLT products an efficient EPON solution can be established. It is well applied on the bidirectional network of broadcast and TV, FTTO or FTTB.
Features
EPON: Fiberway2000 supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006).System’s capacity: The standard configuration of Fiberway2000 has 8 to 16 Ethernet RJ45 ports, realizing the mergence of ONU and the Ethernet switch in the “EPON+LAN” solution.Device size: A 1U device occupies a little space and consumes little power, decreasing the function cost of the services.These EPON products adopt the point-to-multipoint network topology, effectively collect separate Ethernet services and aggregate them. They provide the standard fast-Ethernet interface (RJ45) on the user side and can be connected to the existing network smoothly.Their dynamic bandwidth distribution mechanism enables all users to share the 1Gbps bandwidth reasonably, realizes reliable QoS and guarantees different services in a same network different qualities.They support the IGMP multicast and efficiently utilize the bandwidth.They support port isolation.They support the Ethernet loop detection, automatically judge whether the device-connecting network has Ethernet loopback interrupted, and resume the loop when the loop disappears.They support the multicast VLAN.It supports ACL filtration in layer 2 to layer 7.It supports remote loopback and remote diagnosis of the network state.It has rich OAM function designs, including the configuration, alarm, performance monitoring, fault separation and security management. It not only provides the remote OLT management mode but also supports local console platform management.Specifications
Attributes | Fiberway2008 | Fiberway2016 |
Interface | 8 fixed 10/100BASE-T interfaces 1 fixed PON port | 16 fixed 10/100BASE-T interfaces 1 fixed PON port |
System’s capacity | Maximum coupling ratio, 1:64 | |
PON interface | A 1Gbps transmission rate with downlink and uplink symmetry Hi-sensible optical receiver: Not less than -30dBm Security: ONU authentication mechanism Network coverage diameter: 30 kilometers | |
Standard | IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet – II, Ethernet-SNAP IEEE 802.3ad VLAN Stacking( Q in Q) | |
QoS | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE p802.1p, CoS WR, SP and FIFO Supporting the Mark/Remark priority of 802.1P/DSCP Limiting the uplink/downlink rate based on each ONU Supporting DBA and SLA | |
VLAN | Port-based VLAN IEEE802.1Q VLAN relay Supporting QinQ and flexible QinQ | |
Multicast | IGMP v1/v2/v3 IGMP Snooping Multicast VLAN and limited multicast | |
Reliability | Unidirectional Link Detection (UDLD) Hot swap of the EPON optical module on the expanded slot EAPS fast loopback protection function Optical path protection of EPON | |
Network security | Limiting the maximum number of users on each port Port isolation Controlling the storm of packets Flow-based ACL access control function Transmission data encryption on the PON interface | |
Configuration management | Various management modes such as CLI, Web, SNMP, TELNET and cluster RMONv1, group 1, group 2, group 3 and group 9 SSHv1/v2 Upgrading the software and the bootrom through TFTP and FTP Local or the server’s syslog logs Command prompt in English or in Chinese Network testing tools such as ping and traceroute Debug output | |
Physical size | Installation: Desktop/standard cabinet | |
Environment requirements | Working condition: 0°C-55°C; 10%-85% no condensation | |
Storage condition: -40°C-80°C; 5%-95%; no condensation | ||
Power Source | Input voltage: AC100-240VInput frequency: 47-63Hz Input current: 1A/230V | |
Fiberway 2016 MDU ONU
