- Contact Person : Ms. Hu Angela
- Company Name : Shenzhen Photon Broadband Technology Co., Ltd.
- Tel : 0086-755-86143809
- Fax : 0086-755-86156819
- Address : Guangdong,Shenzhen,2/F Hivac BLD,2nd Langshan Rd ,North Hi-tech Industrial Park Shenzhen,China
- Country/Region : China
- Zip : 518057
4-port EPON ONU
Description
These EPON ONU products adopt the point-to-multipoint network topology, effectively collect separate Ethernet services and aggregate them. They provide the standard fast-Ethernet interface (RJ45) on the user side and can be connected to the existing network smoothly.
Abiding by IEEE802.3ah, Fiberway1000 ONU series, including Fiberway1001 and Fiberway1004, meets relevant requirements of GEPON OUN regulated in Technical Requirements of YD/T1475-2006—EPON and China Telecom EPON Technical Requirement. Fiberway1000 ONU series is widely applied on the broadcast/electrical bidirectional network, FTTH/FTTO/FTTB.
Features
Supports the symmetric uplink/downlink 1Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.Supports FIBERWAY1000 series ONU hybrid networking, minimizing the cost for the carrier to establish its network.Supports SLA and DBA.Occupies little space and consumes a little volume of power.Their dynamic bandwidth distribution mechanism enables all users to share the 1Gbps bandwidth reasonably, realizes reliable QoS and guarantees different services in a same network different qualities.They support the IGMP multicast and efficiently utilize the bandwidth.They support port isolation.They support the Ethernet loop detection, automatically judge whether the device-connecting network has Ethernet loopback interrupted, and resume the loop when the loop disappears.They support the multicast VLAN.It supports remote loopback and remote diagnosis of the network state.It has rich OAM function designs, including the configuration, alarm, performance monitoring, fault separation and security management. It not only provides the remote OLT management mode but also supports local console platform management.Specifications
Attributes | Fiberway1001 | Fiberway1004B |
User trial interface | Fiberway1001: a fixed 10/100M base-T auto-adaptable RJ45 interface;Fiberway10G1: a fixed 10/100/1000M base-T auto-adaptable RJ45 interface | four fixed 10/100M BASE-T auto-adaptable RJ45 interfaces |
PON interface | A 1Gbps transmission rate with downlink and uplink symmetry Network coverage diameter: 30 kilometers Type of the optical interface: SC/PC Hi-sensible optical receiver: Not less than -26dBm Radiation power: 2-7dBm Security: ONU authentication mechanism | A 1Gbps transmission rate with downlink and uplink symmetry Network coverage diameter: 30 kilometers Type of the optical interface: SC/PC Hi-sensible optical receiver: Not less than -26dBm Radiation power: 2-7dBm Security: ONU authentication mechanism |
Standard | IEEE 802.3ah PRC Community Industry Standard (YD/T 1475-2006) IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP Ethernet – II, Ethernet-SNAP | |
VLAN | Port-based VLAN GVRP IEEE 802.1Q VLAN | |
QoS | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) Head Of Line (HOL) prevention mechanism IEEE p802.1p, CoS Four transmission queues on each port are mapped to eight priority values of 802.1p. WR, SP and FIFO Rate control | |
Reliability | Unidirectional Link Detection (UDLD) Dying-Gasp | |
Network security | IEEE 802.1x, port-based access control Supporting the local and remote authentication, EAP termination or transparent transversal CHAP and EAP authentication Limiting the maximum number of users on each port Protecting the port Controlling the storm of packets | |
Management configuration | Various management modes such as CLI, Web, SNMP, TELNET and cluster RMONv1, group 1, group 2, group 3 and group 9 SSHv1/v2 Upgrading the software and the bootrom through TFTP and FTP Local or the server’s syslog logs Command prompt in English or in Chinese Network testing tools such as ping and traceroute Debug output | |
Physical size | 176.5 mm(W) x 126 mm(D) x 30 mm(H) | |
Installation: Plug and play | ||
Heat cooling | The heat generated by the device in a long-time use (24 hours) cannot lead to the degrading of the performance and the deformation of the components. | |
Environment requirements | Working condition: 0°C-60°C; 10%-85%; no condensation | |
Storage condition: -40°C-80°C; 5%-95%; no condensation | ||
Power Source | Type of the power adapter: the on-off power adapter | |
Rated input voltage: 110V~240V, 50/60Hz | ||
Fluctuated range of the input voltage: ±20% (domestic); ±10% (international) | ||
Fuse: Installing the irrecoverable temperature fuse (or temperature resistance) at the input terminal | ||
Power consumption: Up to 10W | ||
Authentication requirements: CCC authentication (domestic), CE authentication (international) or customer-specified authentication | ||
EMC | Radiation Emitting (RE): VCCI Class B | |
Conducted susceptibility (CS) of the power source and network cable: shielded cave E=3V, carrier with a 0.15~80 MHz sine wave, a 1KHz modulation signal, 80% amplitude modulation, normal working (without packet loss, link breakage or rebooting) | ||
ESD test: Research-S031 A-0 ESD Discharging Susceptibility Standards, GB/T17626.2-1998 EMC Test and Measurement ESD Discharging Susceptibility Test, air discharging ±8KV, contact discharging ±6KV, automatic recovery after deletion of packet loss and interference | ||
Thunder attack surge (power source): GB/T 17626.5-1998 standard, Research-S032A-1 Surge Susceptibility Test Standards, 1.2us/50us surge wave, ±2KV differential mode, ±4KV syntype mode, automatic recovery after deletion of link breakage and interference | ||
EFT immunity (power source, network cable): ±2KV power-source port, ±1KV network-cable port, 5KHz duplicate frequency, 5/50ns wave shape, automatic recovery after deletion of link breakage and interference | ||
4-port EPON ONU
